08251880192 dalle ore 16:00 alle 19:00
12NCX750 18 eighteen SOUND Altoparlante Coassiale cx 800W/240W 97/106,5dB 12"
€610.00
Tax included
12NCX750 18 eighteen SOUND Altoparlante Coassiale cx 800W/240W 97/106,5dB 12"
Description
The 12NCX750 is a 12" neodymium coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 40 lt with a nominal dispersion of 80 degrees. The curvilinear profile LF cone provides smooth response within its intended frequency range thanks to its high damping pulp composition.The 75mm (3in) LF copper voice coil employs Interleaved Sandwich Voice coil (ISV) technology, in which a high strength former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy and an extremely linear motor assembly. The low distortion and sound quality are further improved by an aluminum demodulating ring (SDR technology) that flatten LF impedance and phase with constant power transfer.Equipped with proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range with an high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces inductance value above 10 kHz, improving phase and impedance linearisation.
The 2.4" diameter HF diaphragm assembly uses a high strength, high temperature treated Nomex voice coil former joined directly to the titanium diaphragm on its upper bend edge, assuring extended frequency energy transfer. This improves linearity and shows unparalleled reliability when compared with a straight former joint. A specific HF exit profile design has been chosen in order to maximize the cone’s profile coupling. The high force neodymium single magnet structure makes the 12NCX750 a lightweight speaker for its performance class - only 4,7 kg (10.36 lb). The XO12NCX dedicated passive crosssover filter is offered, making this neo coaxial speaker a ready-to-use transducer system. Due to the widespread use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is an additional key feature of the 12NCX750. This has been achieved using exclusive cone and magnet plate treatment processes which increase resistance against corrosion and make the cone water repellent.
The 2.4" diameter HF diaphragm assembly uses a high strength, high temperature treated Nomex voice coil former joined directly to the titanium diaphragm on its upper bend edge, assuring extended frequency energy transfer. This improves linearity and shows unparalleled reliability when compared with a straight former joint. A specific HF exit profile design has been chosen in order to maximize the cone’s profile coupling. The high force neodymium single magnet structure makes the 12NCX750 a lightweight speaker for its performance class - only 4,7 kg (10.36 lb). The XO12NCX dedicated passive crosssover filter is offered, making this neo coaxial speaker a ready-to-use transducer system. Due to the widespread use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is an additional key feature of the 12NCX750. This has been achieved using exclusive cone and magnet plate treatment processes which increase resistance against corrosion and make the cone water repellent.
General Specifications
Nominal Diameter | 300 mm (12 in) |
Rated Impedance | 8 Ohm |
AES Power | 400 W |
Program Power | 800 W |
Peak Power | 1600 W |
Sensitivity | 97 dB |
Frequency Range | 60 - 5000 Hz |
Power Compression @-10dB | 0,9 dB |
Power Compression @-3dB | 2,8 dB |
Power Compression @Full Power | 4,2 dB |
Max Recomm. Frequency | 1800 Hz |
Recomm. Enclosure Volume | 40 - 90 lt. (1,41 - 3,18 cuft) |
Minimum Impedance | 6,4 Ohm at 25°C |
Max Peak To Peak Excursion | 27 mm (1.06 in) |
Voice Coil Diameter | 75 mm (3 in) |
Voice Coil winding material | copper |
Suspension | Triple roll, polycotton |
Cone | Curvilinear, Water repellent, High damping pulp |
General Specifications HF
D.C. Resistance | 6,1 Ohm |
Continuous Power | 120W above 1,1 kHz |
Program power (8) | 240W above 1,1 kHz |
Sensitivity (9) | 107 dB |
Power Compression @Full Power | 4,2 dB |
Frequency Range | 0.9 - 18 kHz |
Min. Xover Frequency | 1.1 kHz |
Diaphragm material | Titanium |
Voice Coil Diameter | 60 mm (2.4 in) |
Voice Coil winding material | Edge-wound aluminum |
Magnet material | Neodymium |
Thiele Small Parameters
Fs | 58 Hz |
Re | 5,4 Ohm |
Sd | 0,0531 sq.mt. (82.31 sq.in.) |
Qms | 6.42 |
Qes | 0,31 |
Qts | 0,29 |
Vas | 63 lt. (2.23 cuft) |
Mms | 48 gr. (0,10 lb) |
BL | 17,5 Tm |
Linear Mathematical Xmax | ± 5.5 mm (±0,22 in) |
Le (1kHz) | 0.62 mH |
Ref. Efficiency 1W@1m (half space) | 98.0 dB |
Half space efficiency | 4.8% |
Mounting information
Overall diameter | 310 mm (12.20 in) |
N. of mounting holes and bolt | 8 |
Mounting holes diameter | 5.9 mm (0,23 in) |
Bolt circle diameter | 295 mm (11.61 in) |
Front mount baffle cutout ø | 280 mm (11 in) |
Rear mount baffle cutout ø | 280 mm (11 in) |
Total depth | 148 mm (5.85 in) |
Flange and gasket thickness | 14 mm (0,55 in) |
Net weight | 4,5 kg (9,92 lb) |
Shipping weight | 5 kg (11,02 lb) |
Packaging Dimensions | 332 x 332 x 184 mm (13.07 x 13.07 x 7.24 in) |
Models
Model | Code | Info |
---|---|---|
12NCX750 | 022128N750 | 8 + 8 Ohm |
12NCX750 | 03712XCR00 | Passive Crossover |